Advertisement

For Sale: Schuler SHP 3500 Mton Hydroforming press

Price has been reduced to facilitate quick sale. The Schuler SHP 3500 press price is $1,975,000 USD FOB Siegen Germany, duties excluded, and is available immediately. The following specifications apply

Schuler 3500 T

Technical Specification

Closing Force 35,000 kN
Pre Forming Force 3,000 kN
Ram Return Force 1,170 kN
Ram Stroke 1,770 mm
Die installation area ram down 1,020 mm
Table dimensions 3,150x2,150 mm
Fast closing speed of ram 400 mm/sec
Ram retraction speed 270 mm/sec
Number of pressure intensifiers 2
Max. internal pressure 4,000 bar
Usable volume of each intensifier 3.75 liters
Total installed capacity approx. 570 KW
Machine dimensions approx. 5,000 x 5,700 x 6,600 (LxWxH above floor)
Net press weight approx. 255 metric tons
Machine Control Allen Bradley
Hydraulics Rexroth
Operating Voltage 480V, 60 Hz, 3 Phase
Control Voltage power parts 120V, 60 Hz
Control Voltage control parts 24V, DC

Contact Information:
Technical Questions: Rich Marando USA 610-371-7070
E-mail: rich.marando@dana.com

Commercial Issues: Charles Noye USA 610-371-7240
E-mail: Charles.noye@dana.com

For Sale: Schwartz Robitec CNC 100 Bender and Loader

Price has been reduced to facilitate quick sale. The SWR CNC 100 bender price is $367,040.00 USD FOB Koln Germany, duties excluded, and is available immediately. The following specifications apply

Basic CNC 100 machine
No mandrel extraction device, but prepped for the addition of this at a later date if necessary.
Latest CNC control, based on Windows 2000 and incorporating Allen Bradley componetry
Reinforced pressure die system
Programmable pressure die clamping pressure
Wiper die holder with cross table index
Wiper die lube
Powered radius setting of the pressure die
Programmable adjustment of axis from the CNC control
Loader magazine for 2m
Robot interface preparation
Includes programmable and powered wiper die, two directions
The loader incorporates a Roland weld seam detector.

The machine is brand new and it includes 12 month warranty on parts and labor.

Technical Data

Max bending capacity: 60 kpsi 114.3x3 mm (4.5" x 0.118")
90 kpsi 101.6 x 2 mm (4.0" x 0.079")
Max. section modulus: 1.73 inch4
Min. tube: 25mm (1.0")
Max/Min CLR 320/100 mm
Max. tube length / carriage travel 3000 mm
Max bending angle: 180 deg + 1 deg
Max bending speed:
Forward: 7.5 RPM
Reverse 12 RPM
Bending Direction CCW
Total Power Requirement 100 kW
Separate hydraulic unit, pump equipment 2 x 170 liter + 120 liter aux. Pump
Operating voltage 480 V D.C. 60 Hz 3- phase
Control Voltage 120 V D.C.
Solenoid Valve Voltage 120 V D.C.
Oil Heater 1 kW
Oil Cooler Water
Weight Approx 19,000 kg

Contact Information:
Technical Questions: Rich Marando USA 610-371-7070
E-mail: rich.marando@dana.com

Commercial Issues: Charles Noye USA 610-371-7240
E-mail: Charles.noye@dana.com